The bed slats are the wooden pieces that support the mattress. These slats can be made of either wood or metal. They are usually placed on the box springs and attach to the frame of the bed.
Bed slats are a vital part of any bed, as they provide support for the mattress. However, if the slats are not properly secured, they can easily fall out of the frame, posing a risk to those who sleep on the bed.
Besides, if the slats are not made of sturdy material, they can easily break, causing even more safety hazards.
It is crucial to ensure that your bed slats are properly secured and made from durable material to avoid these risks.
The risks of bed slats that keep falling
Most people are unaware of the risks associated with bed slats that keep falling. These slats pose a significant danger to children and adults, as they can easily fall out of the bed and cause serious injury.
Numerous reports have been of people being seriously injured or even killed due to these falling slats.
One of the biggest dangers posed by bed slats that keep falling is that they can easily trap a person’s body between the slat and the mattress.
It can cause severe bruising, lacerations, or even death. These slats can also cause head injuries if a person falls on their head while trying to escape from them.
Another major risk associated with bed slats that keep falling is that they can easily block a person’s access to emergency exits.
Possible causes
If you’re dealing with bed slats that keep falling, you’ll first want to assess the situation and determine what’s causing the slats to fall.
Once you’ve determined what’s causing the problem, you can take steps to fix it. Here are some possible causes why bed slats may keep falling:
- The most common reason bed slats keep falling is that they are not properly secured.
- The slats are not the correct size for the bed frame.
- The bed frame may not be sturdy enough to support the weight of the mattress and slats.
- The bed frame is old or worn and needs to be replaced.
- The slats may not be properly aligned with each other.
- The box spring is sagging.
- There is too much space between the slats and the mattress, which lets the mattress move around too much.
- Improper use
Checking these potential causes can help you determine what needs to be done to fix the problem and keep your bed slats in place.
How to fix bed slats that keep falling
After identifying the causes of the problem, you can then fix it accordingly.
Bed slats are not properly secured in place
When bed slats are not correctly secured in place, the constant movement and strain on the wood can cause them to fall out eventually.
It can be a safety hazard and an annoyance since the slats keep falling out every time you move in bed. This is how you fix them:
- Take the slats out of the bed frame.
- Look for screws or nails holding the slats in place and remove them.
- Secure the slats back into the bed frame using screws or nails. Make sure they are evenly spaced apart.
- Reattach any removed hardware in Step 2 and test the bed to make sure it is secure.
The slats are not the correct size for the bed frame
If the slats in your bed frame are constantly falling out, it is likely because they are not the correct size for your frame.
It can cause the frame to become unstable and eventually fall apart. To fix this, you will need to replace the slats with ones that are the correct size for your bed frame.
Once you have the new slats, you will need to remove the old ones. It can be done by unscrewing or unclipping them from the frame.
Next, place the new slats in the frame and replace the screws or clips. Make sure that they are tight so that they do not move around.
If your bed frame has no screws or clips to hold the slats, you can use a staple gun to attach them.
Make sure you do not over-staple them, as this could cause damage to the frame or slats.
The bed frame may not be sturdy enough
The slats are typically held in place by screws or nails that go into the bed’s frame. If the frame is weak, the slats will eventually give way. There are a few things you can do to fix this problem:
- You can add more screws or nails to reinforce the frame. Make sure they are evenly spaced and go into the frame.
- You can replace the weak parts of the frame with stronger ones. It may require some carpentry skills, but it will be worth it in the end.
- You can add a piece of plywood to the bottom of each slat. Cut the plywood to size and then attach it to the slat with wood glue and screws. It will help keep the slats in place and make your bed more comfortable.
- If you don’t feel comfortable doing either of those things, you can buy a new bed frame stronger than the one you have now.
The bed frame is old or worn
Your bed frame might be old or worn out, causing the bed slats to keep falling.
It can be frustrating because your bed isn’t as comfortable as it should be, and you must keep getting up to fix the slats. Here are a few ways to fix the problem:
If your bed frame is old, you might consider buying a new one. A new frame will be more sturdy and won’t wear down as quickly.
If your frame is just worn out, you can try repairing it. One way to do this is using wood glue and clamps to attach the slats back together.
You can also use nails or screws, but make sure they’re not too tight, or they could damage the frame.
Another option is to buy a new set of slats.
The slats may not be properly aligned with each other
If you are having trouble with your bed slats because they keep falling, the issue may be that the slats are not properly aligned with each other.
To fix this, you must look at how the slats are currently aligned and make any necessary adjustments.
One way to check the alignment is to place a piece of paper between two of the slats and then see if it slides easily or not. If it does not slide easily, the slats are not aligned properly, and you will need to adjust them.
You can do this by using a hammer to tap on the side of the slat that is out of alignment until it moves into place. Once it is in place, you can use a drill or screwdriver to secure it in place.
If you do not want to fix it by yourself, you can take your bed frame to a professional to have it adjusted.
The box spring is sagging
The box spring is a vital part of a bed’s support system. When it starts to sag, the entire bed can feel unstable. It can cause the slats on the bed to begin to fall out since they aren’t getting the proper support from the box spring.
There are a few things that you can do to try and fix this issue:
You can add extra slats or supports underneath the box spring if there is enough space. It will help give it extra stability and keep it from sagging further.
If there isn’t enough space for extra slats or supports, you can try putting some bricks or other heavy objects on top of the box spring. It will help to keep it from moving around and sagging.
Too much space between the slats and the mattress
If your bed slats are falling because there is too much space between them and the mattress, there are a few things you can do.
You could add a piece of wood to the existing slats to close the gap or replace the slats with ones closer together.
If you choose to add a piece of wood, it’s best to use a hardwood like oak or maple and make sure that it is cut to the same length as the other slats.
If you choose to replace the slats, make sure that they are all of the same width and thickness so that they will fit snugly against the mattress.
Improper use
Improper use can be caused by various things, such as putting too much weight on the slats or using them for something they’re not meant to do.
Luckily, you can take some simple steps to fix the problem and ensure your slats stay in place.
You’ll first want to make sure the bed frame is appropriately secured to the wall. It will help take some of the weight off of the slats.
If it’s impossible to secure the bed frame to the wall, you may need to add additional support beams underneath it.
You can also try adding more slats to the bed frame. It will help distribute the weight more evenly and prevent the slats from bending or breaking.
What to do after failing to fix bed slats that keep falling
If you have tried to fix bed slats that keep falling and have failed, you can do a few things. One option is to try to fix the bed slats again.
This may be a good solution if you have the time and patience.
However, if you do not think you can fix the bed slats successfully, you may consider buying new ones.
Another option is to purchase a bed frame. It can be a more expensive option, but it can also be a more reliable one.
A bed frame will hold the mattress and box spring in place, which means that the bed slats will not need to bear the weight of the mattress.
Conclusion
Most people don’t think about the importance of a good bed slat support until they start having problems with their bed.
A good bed slat support is important because it helps to keep your mattress in good condition, and it can also help to improve your sleep.
If you are having problems with your bed slats that keep falling, it is easy to fix them yourself.
What you have to do first is identify the cause, then you can fix it according to the tips above.
But if all tips above fail, it will be necessary for you to call for professional help or buy new bed slats for your bedroom.
We hope this guide on how to fix bed slats that keep falling from us can help you sleep better at night and be free from worrying about bed slats from falling again.